Wholesale: Products & Services

Archived System CR SCR060408-02IG Detail

The QORA ASR Gateway application needs to be updated to support changes for ASOG 37, including ASOG, Mech Spec and UOM-ASR Schema changes as mandated by OBF.

Details of the ASOG 37 industry changes can be found at: http://www.atis.org/

Qwest Specific Edits: The following changes that are customer affecting are also being implemented.

QORA Pre-OrderValidation Enhancement

-.Qwest is implementing an enhancement to the Pre-Order validation tool to allow Address Validation using an existing Circuit ID. The Circuit ID, and either the serving wire center (SWC) CLLI code or the NPANXX of the SWC of the End User location are required. Only serialized, non-multipoint circuits may be used to verify an address. Address inquiries obtained during the ASR creation process in the GUI may also be imported directly onto the SALI form.

New QORA GUI and ASR Gateway Validations

-.LTP field – REQTYP = L: A Qwest-specific edit will be implemented to require the LTP field to be populated with a valid entry when the ACT = “N”, “C “, or “D”. If the field is left blank, or the entry is not valid, the ASR is rejected with an error message.

-.LTP field – When the REQTYP = M and the ACT = “N”, “C”, or “D”, the system shall validate the entry in the LTP field against entries in the CFA and SCFA fields and the type of service being requested. If the field is not populated with a valid entry, the ASR will be rejected.

- EXP field – Qwest will enhance the validation to include REQTYP = S for Voice Grade Private Line and REQTYP = M, that when the DDD is less than the standard interval, that the EXP field is populated with a “Y”. If the interval is less than standard and the EXP field is blank, the ASR will be rejected with an error message.

- Qwest is implementing a process change on requests for User Network Interface (UNI) services associated with Ethernet Virtual Connection (EVC). Effective with the ASOG 37 release, these requests need to be submitted using REQTYP ‘S’.. Qwest has been using ‘X’ for UNI with EVC. For UNI orders submitted via the QORA GUI, the appropriate selection in the Select Service Type drop down list will now be ‘Special Access – Transport’.

-.PSLI field – Qwest is implementing an edit when the REQTYP = M and the ACT = N or C and either the ASR.CC or the ASR.WST is populated, and the CSL CLLI code and the PSL CLLI code are in the same LATA that the PSLI is populated with an “F”. If the CSL and PSL are in different LATAs, the system shall validate that the PSLI is populated with “E”. If the PSLI field is invalid, the ASR will be rejected. If the PSL and/or the CSL are not populated, the PSLI field is not validated.

- INTER and INTRA fields - When the WST field or the CC field on the ASR form is populated, the INTRA and INTER fields on the Translation Questionnaire Trunking section are prohibited.

-.PIU field

– When the.REQTYP = M, the. ACT=N, and the CC field on the ASR form is populated or when the CCNA indicates a Wireless Provider, the PIU must equal 0 (zero) or the ASR will be rejected.

-. MUXLOC field – Trunking Form – When the REQTYP = M, the.ACT = N, and the.CFA field on the Trunking form is populated, the.MUXLOC field is required. If the MUXLOC field is left blank, the ASR will be rejected.

- CFA Validation – The system shall implement an enhancement to validate the CFA on all service specific forms when the ASC-EC is populated. When the ASC-EC is populated with a Qwest ICSC code, the system shall perform all existing availability CFA checks and the ASR will be rejected if the CFA is invalid or not available for assignment. When the ASC-EC is populated with a Non-Qwest ICSC code, the system shall attempt to validate the CFA. If the CFA is not found in the Qwest systems, the ASR will not be rejected.

- TSC Field – ASR Form – When the ASR.REQTYP = M and the ASR.ACT=C, D or R, the system shall validate that the value populated in the TSC field is valid. If the TSC is not valid, the ASR will be rejected.

- ECCKT Field – When ACT = C, D,M, or T, the system shall validate that the entry in the ECCKT field is formatted correctly. If the ECCKT is not formatted correctly according to the ASOG requirements, the ASR shall be rejected.

Status History

Project Meetings

Mark Coyne – Qwest said that this CR was effective on September 22 and will be closed.

9/17/08 Systems CMP Meetig

Susan Lorence-Qwest stated that SCR060408-02IG will be moved to CLEC test on 9/22/08.

6/18/08 System CMP Meeting

Kim Whaples-Qwest stated that the QORA ASR Gateway application needs to be updated to support changes for ASOG 37, including ASOG, Mech Spec and UOM-ASR Schema changes as mandated by OBF. The following Qwest specific edits and changes that are customer affecting are being implemented effective September 22, 2008. Details of the ASOG 37 industry changes can be found at: www.atis.org. There are 11 QORA GUI and ASR Gateway validation changes that will be implemented. Qwest is implementing an enhancement to the Pre-Order validation tool to allow Address Validation using an existing Circuit ID. The Circuit ID, and either the serving wire center CLLI code or the NPA NXX of the serving wire center of the End User location is required. Only serialized, non-multipoint circuits may be used to verify an address. Address inquiries obtained during the ASR creation process in the GUI may also be imported directly onto the SALI form. Qwest is implementing a process change on requests for User Network Interface (UNI) services associated with Ethernet Virtual Connection (EVC). Effective with the ASOG 37 release, these requests need to be submitted using REQTYP “‘S”. Qwest has been using “X” for UNI with EVC. For UNI orders submitted via the QORA GUI, the appropriate selection in the Select Service Type drop down list will now be “Special Access – Transport”. When the LTP field has a REQTYP = “L”: A Qwest-specific edit will be implemented to require the LTP field to be populated with a valid entry when the ACT = “N,” “C,” or “D”. If the field is left blank, or the entry is not valid, the ASR is rejected with an error message. The documentation includes other fields that will have edits or changes have more detail them: LTP field, EXP field, PSLI field, INTER and INTRA fields, PIU field, MUXLOC field, CFA Validation, TSC Field, and ECCKT Field. Kim Isaacs-Integra asked if the reference in the CR to UNI was associated to unbundled elements. Kim Whaples-Qwest said that UNI is not associated with unbundled elements.

CenturyLink Response