Product Listing
Call Trace - V11.0
Product Description
Call Trace enables an end-user to trace their last incoming call whether it was answered or not using an automated trace system rather than a manual trace. The mechanical system traces the originating telephone number calling, even if the call was forwarded via a call forwarding service and is completed after a call, whereas a manual trace has to be set up to trace future calls. Call Trace functions even if another Custom Local Area Signaling Systems (CLASS™) feature has been used, such as Last Call Return.
Call Trace (*57):
- Both "ends" of the call must be in a CLASS equipped office for feature to work.
- End-users can issue an order to prevent availability to Call Trace by having their access lines "blocked".
The following access code information is applicable for Plain Old Telephone Service (POTS) and Centrex 21 products, Centrex Plus, Centrex Prime® and Centron® products will receive an access code from your CenturyLink Sales Executive for new accounts and CenturyLink Service Manager for existing accounts. For Centrex 21 follow the instructions below using # instead of * with the access code on a touchtone telephone.
To activate Call Trace with POTS and Centrex 21 products:
- Press *57 (or 1157 from a rotary telephone) immediately after hanging up from the call to be traced.
The voice response system gives directions for activating the trace and quotes the charge if the trace is successful. If Call Trace is not successful, the end-user receives an announcement advising that the call could not be traced (see manual trap).
After three successful traces, from the same number, call CenturyLink at 1-800-244-1111 to advise that you have activated a Call Trace. If the call is threatening, then CenturyLink does not require 3 successful traces.
Upon your request for assistance you will need to provide CenturyLink with:
- Your contact name and telephone number
- Terminating telephone number
- A description of the annoyance call(s)
CenturyLink will:
- Update the description of the calls for each *57 trace
- Verify the subscriber data
- Follow procedures for release of *57 trace pursuant to state tariff
Under normal circumstances, deterrent action is taken only after three successful traces to the same number.
Manual Trap
At your request a Manual Trap request will be placed on your end-user's line. You will need to provide the CenturyLink ACB with:
- Your contact name and telephone number
- Your end-user's Terminating Telephone number
- Remote and Host Common Language Location Identification (CLLI) code
- A description of the harassing or threatening phone call(s)
- Any other information deemed appropriate
- A Law Enforcement case number, Officers Name, Phone Number and location
Release of information and deterrent action by CenturyLink:
If the originating call is:
- A trunk number, CenturyLink will verbally provide a trunk number translation. This may include the CLLI code, Long Distance Carrier (LDX), CLEC and/or independent company information.
- From a non CenturyLink number, CenturyLink will verbally release the information to a Law Enforcement Agency (LEA)
- From a CenturyLink number, CenturyLink will release the information to the LEA only.
Misdirected FAX/Computer
From a CenturyLink number that has been identified, through your equipment, for misdirected FAX/computer, CenturyLink will release the information to you. Please submit your request on your letterhead, via FAX. The suspect information will be verified and you will receive a call back or the information will be FAXed.
Emergency 911 Calls
The Law Enforcement Agency (LEA) determines if the situation is an emergency. Examples of a life-threatening emergency include: medical assistance, kidnapping, hostage situation etc.
In an emergency situation CenturyLink will take calls only from the LEA.
If you receive a call from a Law Enforcement Agency or 911 Public Safety Answering Position (PSAP) for technical and/or network assistance you will refer the call to:
| For Assistance | Contact LEA/PSAP ONLY | Hours of Operation |
| Network Operations Support Group | 800 215-4829 | 24/7 365 days |
Availability
Call Trace is available in 5ESS®, DMS™-10 and DMS-100, and Ericsson/AXE central office switch types where Caller ID/CLASS products are available.
- Available with one-party service
Additional information can be found in the Pre-Ordering Overview.
Compatibility & Restrictions
| Feature/Service | Rules/Restrictions |
| Analog Pair Gain System (AML) | Compatible |
| Bridged Service | Compatible |
| Centrex 21, Centrex Plus, Centron and Centrex Prime | Not available in DMS-10 central offices. Call Trace is not available in DMS-100, Centron, Centrex 21, Centrex Plus and Centrex Prime systems with Meridian Business Sets (P/Phones) Activation/deactivation codes have not been pre-built for these features in Centron, Centrex 21, Centrex Plus and Centrex Prime individual common blocks. Verify with the central office translator whether the access codes have been established in the common block. If they haven't been established, follow existing Centron, Centrex 21, Centrex Plus and Centrex Prime procedures to build the access codes. |
| Coin Operated Lines | Not Compatible |
| Direct Inward Dialing (DID) | Not Compatible |
| Market Expansion Line (MEL) | Not Compatible |
| PBX | Not Compatible |
| Trunks | Not Compatible |
Pricing
Rate Structure
Call Trace may have a recurring and a nonrecurring charge based on state specific Tariffs/Catalogs/Price Lists.
Rates
Retail rates for this feature can be found in the state specificTariffs/Catalogs/Price Lists.
Rates and/or discounts are available in Exhibit A or the specific rate sheet in your Interconnection or Resale Agreement.
Ordering
Ordering Rules
A service order is not necessary to install Call Trace. Call Trace has automatically been added to all access lines where Caller ID/CLASS products are available.
A service order is required to block the ability to use Call Trace.
Additional information on ordering can be found in the Ordering Overview.
Feature Activity Types (Action Codes)
NOTE: When changing from one feature to another, use N and D Feature Activity Types.
Feature Codes (USOCs)
Call Trace Blocking is identified by the USOC HBG.
Feature Detail (FID and Data Requirements)
Adding Denial of Call Trace
This feature is ordered by including:
- Blocking Activity Type E and BLOCK value of 2 - No call trace.
Removing Denial of Call Trace
This feature is removed by including:
- Blocking Activity Type D and BLOCK value of 2 - No call trace.
Last Update: August 12, 2016
Last Reviewed: October 17, 2023